Sodium Meta Bisulphite |
|
Sodium Meta Bisulfite (Na2S2O5) also called as sodium pyrosulphite, meta bisulfite and disodium.
It is used as a food additive and in sanitation as a cleaning agent. Concentrated Sodium Meta Bisulphite is used to remove tree stumps.
Sodium Meta Bisulfite is encountered occasionally as a food preservative with the combination of sulphur dioxide in sweets and moist foods, especially in the foods that contain coconut flavors.
Mainly it is used as an excipient in some tablets as paracetamol. A very important health related aspect of this substance is that it can be added to a blood smear in a test for sickle cell anaemia. This substance causes defunct cells to sickle, hence confirming disease. |
|
Analytical Specification of Sodium Bisulphite |
1. |
Appearence |
Free flowing, Slightly pale yellow power. Free from visible extraneous matter. |
2. |
Solution |
20 % solution will be as water white solution. |
3. |
Matter insoluble in water percent by mass |
0.05 % (Max.) |
4. |
SO2 Content |
64.70% (Purity - 96.00%) |
SO2 Content |
65.35% (Purity - 97.00%) |
5. |
Iron (as Fe) percent by mass |
0.005% (Max.) |
6. |
Heavy Metal as pb |
0.005% (Max.) |
7. |
Assay as NaHSO3 |
97% |
|
|
MATERIAL SAFETY DATA SHEET |
|
Product |
: |
SODIUM META BI SULPHITE |
Common Name |
: |
SMBS |
Chemical Name |
: |
sodium pyrosulfite/ sodium disulfit |
Empirical formula |
: |
Na2 S2 O5 |
Physical Appearance |
: |
White Crystalline Powder. |
CAS No. |
: |
[7681 - 57 - 5] |
|
|
Physical Data |
Molecular Weight |
: |
190.1 |
Boiling Point |
: |
N.A. |
Odour |
: |
Faint odour of Sulphur Dioxide |
Physical Form |
: |
Solid |
|
|
Storage Stability and Handling |
Special Precaution for Transport and Storage |
: |
Keep product dry |
Incompatible Substances |
: |
Alkalis |
Hazardous Decomposition Products |
: |
HCL and H2SO4 |
Hazardous Polymerization |
: |
N.A |
Protective Measures |
: |
Respirators, Gloves, Goggles |
Special Protective Measures |
: |
Remove by use of suitable equipments |
Measures after spillage or leakage |
: |
Remove by use of suitable equipments |
Disposal |
: |
By depositing in official dumps |
|
|
Ignition and Combustion Data |
a. |
Flash Point |
: |
N.A. |
b. |
Extinguishing media |
: |
Water mist, CO2, Foam |
c. |
Special .fire precautions |
: |
None |
d. |
Special fire and explosion hazard |
: |
Non |
|
|
HAZARDS IDENTIFICATION |
Corrosive : N.A.
Causes redness and pain to Skin : N.A.
In case of contact with Eyes, Rinse with plenty of water
In case of contact with Skin, Wash immediately with plenty of water |
|
FIRST AID MEASURES |
In case of contact with eyes, rinse with plenty of water, do not induce vomiting. In case of contact with skin, wash Immediately with plenty of water Wash contaminated clothings before reuse Seek medical aid in all cases. |
|
FIRE FIGHTING MEASURES |
Extinguish Media |
: |
C02 Dry powder and water. |
Special fire fighting procedures |
: |
Wear self contained breathing apparatus and
Protective clothings to prevent contact with skin and
Eyes. |
Unusual fire and explosion Hazard |
: |
Emits toxic fumes of Sulphur Dioxide under fire conditions. |
|
|
ACCIDENT RELEASE MEASURES |
Evacuate Area
Wear self contained breathing apparatus, rubber boots and rubber gloves.
Do not touch spilled material take up the spilled material in plastic container for disposal.
Wash the spilled area with plenty of water. |
|
HANDLING AND STORAGE |
Wear appropriate respirator, Chemical resistant Gloves, Goggles and protective clothing.
Avoid prolonged or repeated exposure. Wash thoroughly after handling.
Do not get in Eyes, on Skil, on Clothing.
Ksep In cool and dry place, away from sunlight. |
|
EXPOSURE CONTROL / PERSONAL PROTECTION |
Wear appropriate respirator, Chemical resistant Gloves, Goggles and protective clothing.
Avoid prolonged or repeated exposure wash thoroughly after handling.
Do not get in Eyes, on Skin, on Clothing.
Do not breathe vapour.'
Get safety shower and eye bath. |
|
PHYSICAL AND CHEMICAL PROPERTIES |
Appearance |
: |
White crystalline powder |
Physical State |
: |
Dry Powder |
Matter Insoluble in water, Calcium
Magnesium and Ammonium hydroxide
precipitate, percent by mass |
: |
0.05% Max |
pH in 5% Solution |
: |
4.0 to 4.5 |
Iron (As Fe) |
: |
10 ppm Max |
Heavy metals (as pb) |
: |
0.05% Max |
|
|
STABILTTY AND REACTIVITY |
Chemical Stability |
: |
Stable at Ambient temperature |
Incompatibilities |
: |
Alkalies, react with rise in temperature. |
Decomposition products |
: |
Emits Toxic fumes like SO2 under fire conditions |
|
|
TOXICOLOGICAL INFORMATION : N.A. |
|
ECOLOGICAL INFORMATION : DATA NOT AVAILABLE |
|
DISPOSAL CONSIDERATION |
Dissolve or Mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Refer your local rules and regulations for disposal. |
|
TRANSPORT INFORMATION |
Not dangerous cargo.
Irritating to skin and eyes
Keep separated from food stuffs. |
|
REGULATORY INFORMATION |
No labeling is required in Accordance with the EEC directions |
|
OTHER INFORMATION |
Name of firm |
: |
Patel Chemical Works |
Mailing address |
: |
K-1/5, G.I.D.C.,
Odhav, Ahmedabad. |
Local bodies involved |
: |
N.A. |
Telephone no. |
: |
(079) 69437382
(079) 22122511 |
Fax No. |
: |
(079) 22121928 |
|
|
DISCLAIMER |
Information contained in this material / chemical safety data sheet is believed to be reliable, but no representation, guarantee or warranties or any kind are made as to its accuracy, suitability for a particular application or results to be obtained from them. It is up to the manufacturer/ seller to ensure that the information contained in the material / chemical safety data sheet is relevant to the product manufactured/ handled or sold by him as the case may be. Mono Chem Industries makes no warranties expressed or implied in respect of the adequacy of this document for any particular purpose. |
|
|